feedback
Rate this webpage

Need
Support?


AMIS-41682: CAN Transceiver, Fault Tolerant , 5.0 V

Overview
Specifications
Datasheet: Fault Tolerant CAN Transceivers (AMIS-41682 and AMIS-41683)
Rev. 9 (213kB)
»Показать химический состав
»Уведомление об обновлениях схем (3)
Product Overview
Описание продукта
The new AMIS-41682 and AMIS-41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS-41683 is identical to the AMIS-41682 but has a true 3.3V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single-wire transmitter and or receiver. Initially it will be used for low speed applications, up to 125kBaud, in passenger cars.
Both AMIS-41682 and AMIS-41683 are implemented in I2T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.
These products consolidate the expertise of ON Semiconductor for in-car multiples transceivers and support together with 0REMX-002-XTP (VAN), AMIS-30660 and AMIS-30663 (CAN high speed) and AMIS-30600 (LIN) another widely used physical layer.
Отличительные черты
 
  • Fully compatible with ISO11898-3 standard
  • Very low electromagnetic emission (EME)
  • Fully integrated receiver filters
  • Permanent monitoring of transmit data input
  • High electromagnetic susceptibility (EMS) in normal- and low-power modes
  • In the event of bus failure, automatic switching to single-wire mode
  • The device will automatically reset to differential mode if the bus failure is removed
  • During failure modes there is full wake-up capability
  • Un-powered nodes do not disturb bus lines
  • Bus errors and thermal shutdown activation is flagged on ERRB pin
  • Short circuit proof to battery and ground
  • Thermal protection
  • The bus lines are protected against transients in an automotive environment
  • Support for low power modes
  • Low current sleep and standby mode
  • Power-on flag on the output
  • Two-edge sensitive wake-up input signal via pin WAKEB
Применения
  • Automotive
Технические информацие
Руководства (1) Спецификацие (1)
Статьи по применению (9) Типы корпусов (2)
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
AMIS41682CANM1G Lifetime
AEC Qualified
PPAP Capable
Pb-free
Halide free
CAN Transceiver, Fault Tolerant , 5.0 V SOIC-8 751AZ 2 Tray JEDEC 8  
AMIS41682CANM1RG Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
CAN Transceiver, Fault Tolerant , 5.0 V SOIC-14 751AP 2 Tape and Reel 3000 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : 17 to 20
Digikey   (2015-07-09) : >10K
Mouser   (2015-07-09) : >1K
PandS   (2015-07-09) : >1K
Datasheet: Fault Tolerant CAN Transceivers (AMIS-41682 and AMIS-41683)
Rev. 9 (213kB)
»Показать химический состав
»Уведомление об обновлениях схем (3)
Product Overview

Product Compliance Status Description Data Transmission Standard Data Rate Number of Drivers Number of Receivers VCC Min (V) VCC Max (V) tPLH Max (µs) IO Max (µA) IIH Max (mA) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     CAN Transceiver, Fault Tolerant , 5.0 V   CAN     1   1   4.75   5.25   8   45000   6.3   SOIC-14 
Ранее просмотренные схемы
Очистить список

Associated Products
  Do you also need ESD Protection Diodes & Arrays?

 
 

Новые микросхемы
 

NCN5193  HART Modem

  • Very low current in idle mode
  • Integrated watchdog, DAC and power amplifier
  • Accepts wide range of supply voltages