feedback
Rate this webpage

Need
Support?


MC100EP40: Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential

Overview
Specifications
Packages
Datasheet: Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential
Rev. 13 (84kB)
»Показать данные по надёжности
»Показать химический состав
»Уведомление об обновлениях схем (9)
Product Overview
Описание продукта
The MC100EP40 is a three-state phase-frequency detector intended for phase-locked loop applications which require a minimum amount of phase and frequency difference at lock. Advanced design significantly reduces the dead zone of the detector. For proper operation, the input edge rate of the R and V inputs should be less than 5 ns. The device is designed to work with a 3.3 V / 5 V power supply.

When Reference (R) and Feedback (FB) inputs are unequal in frequency and/or phase the differential UP (U) and DOWN (D) outputs will provide pulse streams which when subtracted and integrated provide an error voltage for control of a VCO.

When Reference (R) and Feedback (FB) inputs are 80 pS or less in phase difference, the Phase Lock Detect pin will indicate lock by a high state. The VTX (VTR, VTRbar , VTFB , VTFBbar ) pins offer an internal termination network for 50 line impedance environment shown in Figure 2. An external sinking supply of VCC-2 V is required on VTX pin(s). If you short the two differential VTR and VTR (or VTFB and VTFBbar ) together, you provide a 100 termination resistance that is compatible with LVDS signal receiver termination. For more information on termination of logic devices, see AND8020.

The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinkingto 0.5 mA. When not used, VBB should be left open.

For more information on Phase Lock Loop operation, refer to AND8040.

Special considerations are required for differential inputs under No Signal conditio
Отличительные черты
 
  • Maximum Frequency > 2 Ghz Typical
  • Fully Differential
  • Advanced High Band Output Swing of 400 mV
  • Theoretical Gain = 1.11
  • Trise 97 pS Typical, Ffall 70 pS Typical
  • The 100 Series Contains Temperature Compensation
  • PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
  • NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V
  • 50Ω Internal Termination Resistor
  • These are Pb-Free Devices
Технические информацие
Статьи по применению (13) Типы корпусов (1)
Модели - Симуляция (1) Демонстрационные платы - справочники (1)
Спецификацие (1)  
Информация по демонстрационной плате
Продукт Состояние Compliance Короткое описание Поступок
ECLTSSOP20EVB Active
High Frequency TSSOP20 Evaluation Board
Avnet (2015-07-09) : 2
Digikey (2015-07-09) : 1
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
MC100EP40DT Last Shipments
Pb-free
Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential TSSOP-20 948E-02 1 Tube 75  
MC100EP40DTG Active
Pb-free
Halide free
Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential TSSOP-20 948E-02 1 Tube 75 Contact Sales Office
MC100EP40DTR2 Last Shipments
Pb-free
Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential TSSOP-20 948E-02 1 Tape and Reel 2500  
MC100EP40DTR2G Active
Pb-free
Halide free
Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential TSSOP-20 948E-02 1 Tape and Reel 2500 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : 2 to 4
Arrow   (Sat Jul 11 14:01:54 MST 2015) : 367
Avnet   (2015-07-09) : <1K
Digikey   (2015-07-09) : <1K
Mouser   (2015-07-09) : <100
ON Semiconductor   (2015-07-08) : 1,875
PandS   (2015-07-09) : <100
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
ON Semiconductor   (2015-07-08) : 7,500
Datasheet: Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential
Rev. 13 (84kB)
»Показать данные по надёжности
»Показать химический состав
»Уведомление об обновлениях схем (9)
Product Overview

Product Compliance Status Description Input Level Output Level VCC Typ (V) Transfer Gain Typ (mV/degree) CMRR Max (V) fToggle Max (MHz) tpd Typ (ns) tJitter Typ (ps) tR & tF Max (ps) Package Type
 Pb-free 
 Halide free 
 Active     Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential 
 CML 
 ECL 
 ECL 
 3.3 
 5 
 0.93   2   2000   0.55   0.2   150   TSSOP-20 
 Pb-free 
 Halide free 
 Active     Phase-Frequency Detector, 3.3 V / 5 V, ECL Differential 
 CML 
 ECL 
 ECL 
 3.3 
 5 
 0.93   2   2000   0.55   0.2   150   TSSOP-20 
Ранее просмотренные схемы
Очистить список