feedback
Rate this webpage

Need
Support?


NCV70514: Micro-stepping Motor Driver

Overview
Specifications
Datasheet: Micro-stepping Motor Driver
Rev. 1 (272kB)
»Показать химический состав
»Уведомление об обновлениях схем (1)
Product Overview
Описание продукта
The NCV70514 is a micro−stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. The NCV70514 contains a current−translation table and takes the next micro−step depending on the clock signal on the “NXT” input pin and the status of the “DIR” (= direction) register or input pin. The chip provides an error message if stall, an electrical error, an under−voltage or an elevated junction temperature is detected. It is using a proprietary PWM algorithm for reliable current control. NCV70514 is fully compatible with the automotive voltage requirements and is ideally suited for general−purpose stepper motor applications in the automotive, industrial, medical, and marine environment. Due to the technology, the device is especially suited for use in applications with fluctuating battery supplies.
Отличительные черты
 
  • Dual H−bridge for 2−phase Stepper Motors
  • Programmable Peak−current up to 800 mA
  • On−chip Current Translator
  • SPI Interface with Daisy Chain Capability
  • 7 Step Modes from Full−step up to 32 Micro−steps
  • Fully Integrated Current−sensing and Current−regulation
  • On Chip Stall Detection
  • PWM Current Control with Automatic Selection of Fast and Slow Decay
  • Fixed PWM Frequency
  • Active Fly−back Diodes
  • Full Output Protection and Diagnosis
  • Thermal Warning and Shutdown
  • Compatible with 3.3 V Microcontrollers, 5 V Tolerant Inputs, 5 V Tolerant Open Drain Outputs
  • Reset Function
  • Overcurrent Protection
  • Enhanced Under Voltage Management
  • Step Mode Selection Inputs
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
Применения
  • Small Positioning Applications
  • Automotive (headlamp alignment, HVAC, idle control, cruise control)
  • Industrial Equipment (lighting, fluid control, labeling, process control, XYZ tables, robots)
  • Building Automation (HVAC, surveillance, satellite dish, renewable energy systems)
Технические информацие
Программное обеспечение (1) Типы корпусов (1)
Руководства (1) Демонстрационные платы - справочники (3)
Спецификацие (1)  
Информация по демонстрационной плате
Продукт Состояние Compliance Короткое описание Поступок
NV705143R1DBGEVB Active
Pb-free
DB SPI STEPPER DRV STALL
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
NCV70514MW003G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Micro-stepping Motor Driver QFN-32 488AM 3 Tape and Reel 32 Contact Sales Office
NCV70514MW003R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Micro-stepping Motor Driver QFN-32 488AM 3 Tape and Reel 32 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Datasheet: Micro-stepping Motor Driver
Rev. 1 (272kB)
»Показать химический состав
»Уведомление об обновлениях схем (1)
Product Overview

Product Compliance Status Description Type VM Min (V) VM Max (V) VCC Min (V) VCC Max (V) IO Max (A) IO Peak Max (A) Step Resolution Control Type Feedback Method Current Sense Regulator Output Fault Detection Flyback Protection RDS(on) Typ (Ω) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Micro-stepping Motor Driver                                 QFN-32 
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Micro-stepping Motor Driver                                 QFN-32 
Ранее просмотренные схемы
Очистить список

Associated Products
  Do you also need MOSFETs?
Do you also need IGBTs?