feedback
Rate this webpage

Need
Support?


NCV70521: SPI Stepper Motor Driver

Overview
Specifications
Datasheet: Micro-stepping Motor Driver
Rev. 2 (311.0kB)
»Показать химический состав
»No Product Change Notifications exist
Product Overview
Описание продукта
The NCV70521 is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. The NCV70521 contains a current-translation table and takes the next micro-step depending on the clock signal on the NXT input pin and the status of the DIR (direction) register or input pin. The chip provides a so-called Speed and Load Angle output. This allows the creation of stall detection algorithms and control loops based on load-angle to adjust torque and speed. It uses a proprietary PWM algorithm for reliable current control. The NCV70521 is implemented in I2T100 technology, enabling both high voltage analog circuitry and digital functionality on the same chip. The chip is fully compatible with the automotive voltage requirements. The NCV70521 is ideally suited for general purpose stepper motor applications in the automotive environment.
Отличительные черты
 
  • Dual H-Bridge for 2 phase stepper motors
  • Programmable peak-current up to 1.5 A using a 5-bit current DAC
  • On-chip current translator
  • SPI interface
  • Speed and load-angle output
  • 7 step modes from full-step up to 32 micro-steps
  • Fully integrated current-sense
  • PWM current control with automatic selection of fast and slow decay
  • Low EMC PWM with selectable voltage slopes
  • Active fly-back diodes
  • Full output protection and diagnosis
  • Thermal warning and shut-down
  • Compatible with 5V and 3.3V microcontrollers
End Products
  • Automotive headlight position
  • Flap/valve control in engine management
  • Folding displays
  • HVAC and LPG expansion valves
Технические информацие
Руководства (1) Спецификацие (1)
Статьи по применению (5) Типы корпусов (1)
Брошюры (1) Демонстрационные платы - справочники (4)
Информация по демонстрационной плате
Продукт Состояние Compliance Короткое описание Поступок
NCV7052XGEVK Active
Pb-free
NCV7052X Family Evaluation Kit
Avnet (2015-07-09) : 1
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
NCV70521MN003G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
SPI Stepper Motor Driver NQFP-32 560AA 3 Tube 40 Contact Sales Office
NCV70521MN003R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
SPI Stepper Motor Driver NQFP-32 560AA 3 Tape and Reel 2500 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
ON Semiconductor   (2015-07-08) : 960
PandS   (2015-07-09) : <100
Market Leadtime (weeks) : Contact Factory
Datasheet: Micro-stepping Motor Driver
Rev. 2 (311.0kB)
»Показать химический состав
»No Product Change Notifications exist
Product Overview

Product Compliance Status Description Type VM Min (V) VM Max (V) VCC Min (V) VCC Max (V) IO Max (A) IO Peak Max (A) Step Resolution Control Type Feedback Method Current Sense Regulator Output Fault Detection Flyback Protection RDS(on) Typ (Ω) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     SPI Stepper Motor Driver   Stepper       6   40   1.5                     NQFP-32 
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     SPI Stepper Motor Driver   Stepper       6   40   1.5                     NQFP-32 
Datasheet: Micro-stepping Motor Driver
Rev. 2 (311.0kB)
»Показать химический состав
»No Product Change Notifications exist
Product Overview
Case Outlines
560AA   
Ранее просмотренные схемы
Очистить список

Associated Products
  Do you also need MOSFETs?
Do you also need IGBTs?