feedback
Rate this webpage

Need
Support?


NCV70522DQ: SPI Stepper Driver with Voltage Regulator

Overview
Specifications
Datasheet: Micro-Stepping Motor Driver, SSOP36
Rev. 2 (224kB)
»Показать химический состав
»Уведомление об обновлениях схем (1)
Product Overview
Описание продукта
The NCV70522DQ is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and a SPI interface with an external microcontroller. The NCV70522DQ features an internal current-translation table: it takes the next micro-step depending on the clock signal on the stepping input pin (NXT) and the status of the direction register or input pin (DIR). A reliable current control is achieved using an integrated proprietary PWM algorithm.
The NCV70522DQ includes a so-called Speed and Load Angle (SLA) output, allowing the creation of stall detection algorithms and control loops to adjust torque and speed based on the motor's back electromotive force (BEMF).
The NCV70522DQ is implemented in I2T100 technology, enabling both high voltage analog circuitry and digital functionality on the same chip. The device is fully compatible with automotive voltage and temperature requirements and suited to general purpose stepper motor applications in the automotive, industrial, medical and marine domains.
Отличительные черты
 
  • Dual H-Bridge for 2 Phase Stepper Motors
  • Programmable Peak-Current up to 1.2 A Continuous (1.5 A Short
    Time), Using a 5Bit Current DAC
  • On-Chip Current Translator
  • SPI Interface
  • Speed and Load-Angle Output
  • 7 Step Modes from Full-Step up to 32 Micro-Steps
  • Fully Integrated Current-Sense
  • PWM Current Control with Automatic Selection of Fast and Slow Decay
  • Low EMC PWM with Selectable Voltage Slopes
  • Active Fly-back Diodes
  • Full Output Protection and Diagnosis
  • Thermal Warning and Shutdown
  • Digital IOs Compatible with 5 V and 3.3 V Microcontrollers
  • Integrated 5 V Voltage Regulator to Supply an External Microcontroller
  • Integrated Reset Function to Reset External Microcontroller
  • Integrated Watchdog Function
  • These are PbFree Devices
Технические информацие
Статьи по применению (4) Спецификацие (1)
White Papers (1) Типы корпусов (1)
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
NCV70522DQ004G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
SPI Stepper Driver with Voltage Regulator SSOP-36 EP 940AB 2 Tube 36 Contact Sales Office
NCV70522DQ004R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
SPI Stepper Driver with Voltage Regulator SSOP-36 EP 940AB 2 Tape and Reel 1500 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Datasheet: Micro-Stepping Motor Driver, SSOP36
Rev. 2 (224kB)
»Показать химический состав
»Уведомление об обновлениях схем (1)
Product Overview

Product Compliance Status Description Type VM Min (V) VM Max (V) VCC Min (V) VCC Max (V) IO Max (A) IO Peak Max (A) Step Resolution Control Type Feedback Method Current Sense Regulator Output Fault Detection Flyback Protection RDS(on) Typ (Ω) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     SPI Stepper Driver with Voltage Regulator                                 SSOP-36 EP 
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     SPI Stepper Driver with Voltage Regulator                                 SSOP-36 EP 
Ранее просмотренные схемы
Очистить список

Associated Products
  Do you also need MOSFETs?
Do you also need IGBTs?