feedback
Rate this webpage

Need
Support?


NCV7381: Clamp 30 FlexRay™ Transceiver

Overview
Specifications
Packages
Applications
Datasheet: NCV7381 FlexRay™ Transceiver
Rev. 2 (159kB)
»Показать химический состав
»Уведомление об обновлениях схем (3)
Product Overview
Описание продукта
NCV7381 is a single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side.
NCV7381 mode control functionality is optimized for nodes permanently connected to car battery.
It offers excellent EMC and ESD performance.
Отличительные черты
 
  • Compliant with FlexRay Electrical Physical Layer Specification
    Rev 3.0.1
  • FlexRay Transmitter and Receiver in Normal-power Modes for
    Communication up to 10 Mbit/s
  • Support of 60 ns Bit Time
  • FlexRay Low-power Mode Receiver for Remote Wakeup Detection
  • Excellent Electromagnetic Susceptibility (EMS) Level over Full
    Frequency Range. Very Low Electromagnetic Emissions (EME)
  • Bus Pins Protected against >10 kV System ESD Pulses
  • Safe Behavior under Missing Supply or No Supply Conditions
  • Interface Pins for a Protocol Controller and a Host
    (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
  • INH Output for Control of External Regulators
  • Local Wakeup Pin WAKE
  • TxEN Time-out
  • BGE Feedback
  • Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
    - VBAT Supply Parametrical Range from 5.5 V to 50 V
    - VCC Supply Parametrical Range from 4.75 V to 5.25 V
    - VIO Supply Parametrical Range from 2.3 V to 5.25 V
  • Compatible with 14 V and 28 V Systems
  • Operating Ambient Temperature -40C to +125C (TAMB_Class1)
  • Junction Temperature Monitoring with Two Levels
  • FlexRay Functional Classes
    - Bus Driver Voltage Regulator Control
    - Bus Driver Bus Guardian Interface
    - Bus Driver Logic Level Adaptation
    - Bus Driver Remote Wakeup
  • Automotive Qualification According to AECQ100 (Rev. F)
Применения   End Products
  • In Vehicle Networking
  • Powertrain
  • X-by-Wire
  • Safety
 
  • Automobiles
Технические информацие
Программное обеспечение (2) Типы корпусов (1)
Статьи по применению (1) Демонстрационные платы - справочники (9)
Спецификацие (1)  
Информация по демонстрационной плате
Продукт Состояние Compliance Короткое описание Поступок
NCV73810V2GEVB Active
Pb-free
Flexray Evaluation Board
NCV7381GEVK Active
Pb-free
Clamp 30 FlexRay™ Evaluation Kit
Avnet (2015-07-09) : 1
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
NCV7381DP0G Lifetime
AEC Qualified
PPAP Capable
Pb-free
Halide free
Clamp 30 FlexRay™ Transceiver SSOP-16 565AE 2 Tube 76  
NCV7381DP0R2G Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Clamp 30 FlexRay™ Transceiver SSOP-16 565AE 2 Tape and Reel 2000 Contact Sales Office
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : Contact Factory
Market Leadtime (weeks) : Contact Factory
Datasheet: NCV7381 FlexRay™ Transceiver
Rev. 2 (159kB)
»Показать химический состав
»Уведомление об обновлениях схем (3)
Product Overview

Product Compliance Status Description Data Transmission Standard Data Rate Number of Drivers Number of Receivers VCC Min (V) VCC Max (V) tPLH Max (µs) IO Max (µA) IIH Max (mA) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Clamp 30 FlexRay™ Transceiver   FlexRay   10 Mb/s   1   1   5.5   50   0.06   60000   17   SSOP-16 
Ранее просмотренные схемы
Очистить список

Associated Products
  Do you also need ESD Protection Diodes & Arrays?

Do you need a device with connectivity to Clamp 15 ECUs? NCV7383

 
 

Новые микросхемы
 

NCN5193  HART Modem

  • Very low current in idle mode
  • Integrated watchdog, DAC and power amplifier
  • Accepts wide range of supply voltages