feedback
Rate this webpage

Need
Support?


NCV890203: Automotive Switching Regulator, Buck, 2.0 A, 2 MHz, Reset, Adjustable Delay

Overview
Specifications
Datasheet: 2A, 2MHz Automotive Buck Switching Regulator with RESET
Rev. 0 (156kB)
»Показать химический состав
»No Product Change Notifications exist
Product Overview
Описание продукта
The NCV890203 is a fixed−frequency, monolithic, Buck switching regulator intended for Automotive, battery−connected applications that must operate with up to a 36 V input supply. The regulator is suitable for systems with low noise and small form factor requirements often encountered in automotive driver information systems. The NCV890203 is capable of converting the typical 4.5 V to 18 V automotive input voltage range to outputs as low as 3.3 V at a constant switching frequency above the sensitive AM band, eliminating the need for costly filters and EMI countermeasures. A Reset pin signals when the output is in regulation, and a pin is provided to adjust the delay before the RSTB signal goes high. The NCV890203 also provides several protection features expected in Automotive power supply systems such as current limit, short circuit protection, and thermal shutdown. In addition, the high switching frequency produces low output voltage ripple even when using small inductor values and an all−ceramic output filter capacitor − forming a space−efficient switching regulator solution.
Отличительные черты
 
  • Internal N−Channel Power Switch
  • Low VIN Operation Down to 4.5 V
  • High VIN Operation to 36 V
  • Withstands Load Dump to 40 V
  • 2 MHz Free−running Switching Frequency
  • Reset with Adjustable Delay
  • Logic level Enable Input Can be Directly Tied to Battery
  • 2.2 A (min) Cycle−by−Cycle Peak Current Limit
  • Short Circuit Protection enhanced by Frequency Foldback
  • ±1.75% Output Voltage Tolerance
  • Output Voltage Adjustable Down to 0.8 V
  • 1.4 Millisecond Internal Soft−Start
  • Thermal Shutdown (TSD)
  • Low Shutdown Current
  • NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements
  • Wettable Flanks DFN (pin edge plating)
  • These Devices are Pb−Free and are RoHS Compliant
Применения   End Products
  • Audio
  • Infotainment
  • Safety - Vision Systems
  • Instrumentation
 
  • Automotive
Технические информацие
Программно-инструментальные средства разработки (1) Типы корпусов (1)
Модели - Симуляция (2) Видео (1)
Спецификацие (1) Демонстрационные платы - справочники (5)
Информация по демонстрационной плате
Продукт Состояние Compliance Короткое описание Поступок
NCV890203MWGEVB Active
Pb-free
2A 2MHz Automotive Switching Buck Regulator with Reset and Adjustable Delay Evaluation Board
Avnet (2015-07-09) : 2
Mouser (2015-07-09) : 2
Наличие и образцы
Продукт
Состояние
Compliance
Описание
Корпус
MSL*
Контейнер
Бюджетная цена единицы
Тип
Размеры
Тип
Кол.
NCV890203MWTXG Active
AEC Qualified
PPAP Capable
Pb-free
Halide free
Automotive Switching Regulator, Buck, 2.0 A, 2 MHz, Reset, Adjustable Delay DFN-10 485C 1 Tape and Reel 3000 $1.33
* Уровень чувствительности компонента к влажности
Market Leadtime (weeks) : 4 to 8
Datasheet: 2A, 2MHz Automotive Buck Switching Regulator with RESET
Rev. 0 (156kB)
»Показать химический состав
»No Product Change Notifications exist
Product Overview

Product Compliance Status Description Topology Control Mode VCC Min (V) VCC Max (V) VO Typ (V) IO Typ (A) Efficiency (%) fSW Typ (kHz) Package Type
 AEC Qualified 
 PPAP Capable 
 Pb-free 
 Halide free 
 Active     Automotive Switching Regulator, Buck, 2.0 A, 2 MHz, Reset, Adjustable Delay   Step-Down   Current Mode   4.5   40   Variable   2     2000   DFN-10 
Ранее просмотренные схемы
Очистить список